Design of a DVB-T2 simulation platform and network optimization with Simulated Annealing

The implementation of the Digital Terrestrial Television is becoming a reality in the Spanish territory. In this context, with the satellite and cable systems, this technology is one of the possible mediums for the television signal transmission. Its development is becoming crucial for the digital transition in those countries which mainly depend on the terrestrial networks for the reception of multimedia contents. However, due to the maturity of the current standard, and also to the higher requirements of the customer needing (HDTV, new contents, etc.), a revision of the current standard becomes necessary. The DVB organisation in collaboration with other entities and organisms has developed a new standard version capable to satisfy those requirements. The main objective of the project is the design and implementation of a physical layer simulation platform for the DVB-T2 standard. This simulator allows the theoretical evaluation of the new enhanced proposals, making easier a later field measurement stage and the future network deployment. The document describes the implementation of the simulation platform as well as its subsequent validation stage, including large graphical results that allow the evaluation and quantification of the improvements introduced over the current standard version (DVB-T). On the other hand, and as future investigation lines, a solution for the future DVB-T2 network deployment is performed, enhancing the coverage capacity of the current network by the use of iterative meta-heuristic techniques. Finally it has to be mentioned that this work has been performed within the context of a project called FURIA, which is a strategic research project funded by the Spanish Ministry of Industry, Tourism and Commerce

Design of a simulation platform to test next generation of terrestrial DVB

Digital Terrestrial Television Broadcasting (DTTB) is a member of our daily life routine, and nonetheless, according to new users’ necessities in the fields of communications and leisure, new challenges are coming up. Moreover, the current Standard is not able to satisfy all the potential requirements. For that reason, first of all, a review of the current Standard has been performed within this work. Then, it has been identified the needing of developing a new version of the standard, ready to support enhanced services, as for example broadcasting transmissions to moving terminals or High Definition Television (HDTV) transmissions, among others. The main objective of this project is the design and development of a physical layer simulator of the whole DVB-T standard, including both the complete transmission and reception procedures. The simulator has been developed in Matlab. A detailed description of the simulator both from a functional and an architectural point of view is included. The simulator is the base for testing any possible modifications that may be included into the DVB-T2 future standard. In fact, several proposed enhancements have already been carried out and their performance has been evaluated. Specifically, the use of higher order modulation schemes, and the corresponding modifications in all the system blocks, have been included and evaluated. Furthermore, the simulator will allow testing other enhancements as the use of more efficient encoders and interleavers, MIMO technologies, and so on. A complete set of numerical results showing the performance of the different parts of the system, are presented in order to validate the correctness of the implementation and to evaluate both the current standard performance and the proposed enhancements. This work has been performed within the context of a project called FURIA, which is a strategic research project funded by the Spanish Ministry of Industry, Tourism and Commerce. A brief description of this project and its consortium has been also included herein, together with an introduction to the current situation of the DTTB in Spain (called TDT in Spanish)

Design of a simulation platform to test next generation of terrestrial DVB

Digital Terrestrial Television Broadcasting (DTTB) is a member of our daily life routine, and nonetheless, according to new users’ necessities in the fields of communications and leisure, new challenges are coming up. Moreover, the current Standard is not able to satisfy all the potential requirements. For that reason, first of all, a review of the current Standard has been performed within this work. Then, it has been identified the needing of developing a new version of the standard, ready to support enhanced services, as for example broadcasting transmissions to moving terminals or High Definition Television (HDTV) transmissions, among others. The main objective of this project is the design and development of a physical layer simulator of the whole DVB-T standard, including both the complete transmission and reception procedures. The simulator has been developed in Matlab. A detailed description of the simulator both from a functional and an architectural point of view is included. The simulator is the base for testing any possible modifications that may be included into the DVB-T2 future standard. In fact, several proposed enhancements have already been carried out and their performance has been evaluated. Specifically, the use of higher order modulation schemes, and the corresponding modifications in all the system blocks, have been included and evaluated. Furthermore, the simulator will allow testing other enhancements as the use of more efficient encoders and interleavers, MIMO technologies, and so on. A complete set of numerical results showing the performance of the different parts of the system, are presented in order to validate the correctness of the implementation and to evaluate both the current standard performance and the proposed enhancements. This work has been performed within the context of a project called FURIA, which is a strategic research project funded by the Spanish Ministry of Industry, Tourism and Commerce. A brief description of this project and its consortium has been also included herein, together with an introduction to the current situation of the DTTB in Spain (called TDT in Spanish)

Design of a DVB-T2 simulation platform and network optimization with Simulated Annealing

The implementation of the Digital Terrestrial Television is becoming a reality in the Spanish territory. In this context, with the satellite and cable systems, this technology is one of the possible mediums for the television signal transmission. Its development is becoming crucial for the digital transition in those countries which mainly depend on the terrestrial networks for the reception of multimedia contents. However, due to the maturity of the current standard, and also to the higher requirements of the customer needing (HDTV, new contents, etc.), a revision of the current standard becomes necessary. The DVB organisation in collaboration with other entities and organisms has developed a new standard version capable to satisfy those requirements. The main objective of the project is the design and implementation of a physical layer simulation platform for the DVB-T2 standard. This simulator allows the theoretical evaluation of the new enhanced proposals, making easier a later field measurement stage and the future network deployment. The document describes the implementation of the simulation platform as well as its subsequent validation stage, including large graphical results that allow the evaluation and quantification of the improvements introduced over the current standard version (DVB-T). On the other hand, and as future investigation lines, a solution for the future DVB-T2 network deployment is performed, enhancing the coverage capacity of the current network by the use of iterative meta-heuristic techniques. Finally it has to be mentioned that this work has been performed within the context of a project called FURIA, which is a strategic research project funded by the Spanish Ministry of Industry, Tourism and Commerce

Notas sobre el airampu (Opuntia sp.)

Por intermedio de un alumno llegó al laboratorio una muestra de semillas de Airampu (Opuntia Sp.) procedentes de Bolivia, y la hermosa coloración del extracto acuoso nos indujo a tratar de identificar la materia tintórea y establecer sus posibles aplicaciones. Advertiremos que conservamos el nombre de airampu y no adoptamos el de airampo, porque así lo designan en Chiguangayo, punto de origen, y a ello nos autoriza nuestro poeta Juan Carlos Dávalos contestando gentilmente a la consulta que le hicimos. Por otra parte, el botánico Fortunato D. Herrera así designa al cactus originario y a él debemos los datos botánicos que agregamos.Facultad de Ciencias Agrarias y Forestale

Design of a hydroponic test to evaluate the biostimulant potential of new organic and organomineral products

Currently, the use of biostimulants is increasing due to the need for greater productivity in agriculture. The European Union presented a new fertilizer regulation, UE 2019/1009, appearing for the first time the concept of biostimulants. Its main objective is to improve the efficiency of plants in the absorption and assimilation of nutrients or their tolerance to biotic or abiotic stresses, regardless of the nutrient content of the product. The objective of this work consisted in the development of a methodology to test in a short-term experiment the efficiency of commercial products as potential biostimulants in a crop of Capsicum annuum L. in strictly hydroponic conditions. Plants were irrigated with the respective product at the recommended dose in water, without the addition of other nutritional sources for 15 days. At the end of the test, the weights of the root and aerial part, the humidity, the chlorophyll indexes, and nutritional leaf content, as well as the volume and morphology of the roots and plants were obtained to evaluate the biostimulant effects on the plant growth and development. The water consumption was also evaluated to analyze whether any of the products generates greater water savings. The study concluded that the nutritive solutions with biostimulants produced a greater increase in the weight of the plant and a lower percentage of leaf moisture, as well as higher values of leaf chlorophyll. On the other hand, it was humic, fulvic, and algae biostimulants that presented the best values in terms of water savings. The methodology developed could be set to test in the short term the biostimulant potential of new productsThis research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sector

DVB-T2 network optimization with swimulated annealing

Postprint (author’s final draft

CO oxidation on stepped-Pt(111) under electrochemical conditions: insights from theory and experiment

The co-adsorption of CO and OH on two Pt stepped surfaces vicinal to the (111) orientation has been evaluated by means of density functional theory (DFT) calculations. Focusing on Pt(533) and Pt(221), which contain (100) and (111)-steps, respectively, we find that (111)-steps should be more reactive towards CO oxidation than surfaces containing (100)-steps. The DFT results are compared with electrochemical experiments on the CO adsorption and oxidation on these vicinal surfaces.This work has been supported by the European Union through the Marie-Curie-ITN ELCAT. Further, J.B., A.C.-V. and T.J. gratefully acknowledge support from the “Deutsche Forschungsgemeinschaft” (DFG) as well as from the bwGRiD for computing resources. Further, support from the European Research Council through the ERC-StG THEOFUN is gratefully acknowledged. E.H. and C. B.-R. also acknowledge the support from MICIN (project no. CTQ2010-16271)

Influence of the CO Adsorption Environment on Its Reactivity with (111) Terrace Sites in Stepped Pt Electrodes under Alkaline Media

The effect of the electrode potential in the reactivity of platinum stepped single crystal electrodes with (111) terraces toward CO oxidation has been studied. It is found that the CO adlayer is significantly affected by the potential at which the adlayer is formed. The electrochemical and FTIR experiments show that the adsorbed CO layer formed in acidic solution at 0.03 V vs SHE is different from that formed at −0.67 V vs SHE in alkaline solutions. The major effect of the electrode potential is a change in the long-range structure of CO adlayer. The adlayer formed in alkaline media presents a higher number of defects. These differences affect the onset and peak potential for CO stripping experiments. The stripping voltammogram for the adlayer formed at −0.67 V vs SHE always shows a prewave and the peak potential is more negative than that observed for the adlayer formed at 0.03 V vs SHE. This means that the apparent higher activity for CO oxidation observed in alkaline media is a consequence of the different CO adlayer structure on the (111) terrace, and not a true catalytic effect. The different behavior is discussed in terms of the different mobility of CO observed depending on the electrode potential. Also, the FTIR frequencies are used to estimate the pzc (potential of zero charge) for the Pt(111) electrode covered with a CO adlayer.M.J.S.F would like to thanks CNPq, Brazil, for financial support for his stay at Universidad de Alicante. This work has been financially supported by the MICINN (Spain) (project CTQ2010-16271) and Generalitat Valenciana (project PROMETEO/2009/045, FEDER)